• 5/8 inch, 5,000 lbs. Rated for single user fall protection up to 310 lbs.
• 1 inch, 10,000 lbs. Rated for fall protection up to 620 lbs.
  

The exclusive Norguard Easy Button TM feature boosts productivity by providing immediate removal where other bring work to a standstill.

• Virtually eliminates the need for tools to remove a stuck anchor from the hole—giving the user instant mobility
• No more jobsite scavenger hunts to locate a hammer and a punch to remove a stuck anchor
• Security assurance: The anchor can be set as hard as desired without fear of getting stuck in the hole.
  

The exclusive pivoting handle provides cable kink protection. Load cable and chock release cables are shielded from damage caused by grinding against the concrete lip of the hole.

More versatile and economical than anchor straps:

• Anchor straps must be pre-positioned before pouring the concrete. The removable hole anchor allows a new anchor point to be placed any time the need arises.
• Anchor straps must be thrown away after each use. The removable hole anchor can be used over and over, lowering costs dramatically.
• Push the Easy ButtonTM, and “click,” the chocks are released for easy handle retraction and anchor removal.
  

Removable Hole Anchor

• Portable anchor with static tensile strength: 5,000 lb minimum.
• Fits 3 1/2” to 13 1/4 “ flanges (88.9 mm to 337 mm)
• Innovative engineered solution
• Horizontal as well as vertical beam installation
• Net weight 4 lbs (1.81 KG)
  

Portable Anchor

• Constructed of Stainless Steel
• The Swivel rotates 360 degrees
  
• This fall arrest anchorage for one user is rated at 5000 lbs.
  
• Shoulder Bushing available in 3/4" and 5/8"
  
• Used for Steel, Concrete or rock bolt underground installation.
  

Swivel Anchor

• Rated for 5000 lbs. in any direction
• Anchor easily installed with primary and secondary locking
• Can easily be adjusted to exactly where you want it.
• Fits beam flanges from 4" to 14" wide

Grip Beam Anchor

• Use the NAT-008 to convert an overhead I-beam into a mobile fall arrest anchorage point with this Adjustable Beam Trolley
• Adjusts to fit beams with flange widths from 3" to 8"
• This Beam Troilley has been designed, tested and rated for one person fall arrest
• Works well with self retracting lifelines

Beam Trolly

 

*Available with 3/4" hole (See N905 Below)

• Inserts into anchorages
• Made of SAE 4140 Heat Treated Alloy Steel
• 100% proof loaded to 3600 lbs.
• Minimum tensile strength of 5000 lbs.
• Weight approximately 13.5 oz.

Instructions:

Use minimum grade 8 quality bolt, with locknut and washer. Torque bolt to 65-75 ft-lbs for 1/2" hole, 145-155 ft-lbs for 5/8" hole and 240-250 ft-lbs for 3/4" hole. Ensure compatibility between anchor and connecting hardware. When mounting, anchorage base must be flush with mounting surface. Also, when mounting on a vertical plane (i.e. a wall), the anchor ring must be perpendicular to the ground plane. Mounting surface must have a minimum tensile of 5M.

Anchor D Ring

NAP-050 (Made For Steel Installation)
Plate size 6" x 6" x 1/2

Anchor Plate

• Plate size 7 1/2“ x 6” x 1/2“
• 304 Stainless Steel standard, 316 Stainless Steel available
• Bolt to steel structure using 3/4" grade 5 bolts or to concrete using 2 Hilti HSL M16/25 anchor bolts installed to Hilti specifications

More...

• The Web Strap is made from High Strength 12000 lbs Minimum Breaking Strength rated 2" wide Polyester webbing
  
• Professionally engineered, tested and approved as a 5000 lbs fall arrest anchorage for one user
  
• Made for durability with 2 Ply construction for abrasion resistance and a longer life span
  
• Choker Style with web loop at one end and D-ring at other end
  
• NWS-030 3ft
  
• NWS-040 4ft
  
• NWS-050 5ft
  

We can do Custom Lengths to meet your requirements.

Web Strap